METHODS TO CHECK THE BLOUSE DRAWING AFTER PRINTOUT

Before Making a Blouse Cutting, Must Check the Below Points After Receiving the Printout

1. BLOUSE BACK DRAWING AFTER PRINTOUT

2. BLOUSE FRONT DRAWING AFTER PRINTOUT

3. BLOUSE SLEEVE DRAWING AFTER PRINTOUT

4. BLOUSE BELT PIECE DRAWING AFTER PRINTOUT

 

                         Method To Take Measurement From the Customer - 2
                                          DIRECT BODY MEASUREMENT

    5. SLEEVE LENGTH

                 Hand height should be taken from the solder sleeve edge to their sleeve height requirement. 

    6. SLEEVE ROUND 

  Hand loose should be taken from the customers where their sleeve height ends.       Don't leave any loose. EXAMPLE = 12”

        Take The Sleeve Loose as Per the Customer’s Measurement For Ordinary Blouses,                     

For  Model Sleeves Like Cap Sleeve And Petal Sleeve Sleeve Round, Loose Can Extend By .5 Inch.

7.  MIDDLE HAND LOOSE

  This measurement should be taken in the customers middle hand part without leaving any loose. EXAMPLE = 12”, take The Customer Measurement As Per The Middle Hand Loose. This Middle Hand Loose Should Not Less From The Sleeve Round, And Should Not Exceed From Above 1.5 Inch From Sleeve Loose. The Both Measurement Can Be Equal Also.

8. FRONT NECK HEIGHT (DEPTH)

This should be taken from the front side. The neck deep minimum should be 1/2 “down from their body armhole line. The tape should not take by cross; it should be straight.

EXAMPLE = armhole 5 ½ + ½” = Total 6” Minimum neck height should be 6”.

Please Check the Front Neck Height Measurement with Customer’s Center Chest Measurement, 

For Body Loose 26-30 = Front Neck Height 5.5 Inch

For Body Loose 31-36 = Front Neck Height 5.75Inch; 

For Body Loose 37-38 = Front Neck Height 6 Inch; For Body Loose 39-43 = Front Neck Height 6.50 Inch; For Body Loose 44-49 = Front Neck Height 6.75 Inch.

Measurement Can Increase Or Decrease From .50 Inch From The Above Measurements. If This Measurement Exceeds From The Above Rule, The Neck Width Will Be Less, So The Blouse Will Not Set Perfect.

9.  BACK NECK HEIGHT (DEPTH)

     This should be taken from the back side. The neck deep minimum should be ½” down from their body armhole line. The tape should not taken by cross, it should be straight. Back Neck Height Can Be Down From Minimum .5 Inch From The Front Neck Height. The

Measurements Can Be Changed according To the Customer’s Choice.

EXAMPLE = armhole 5 ½” + ½ = Total 6” Minimum neck height should be 6”.

10.WAIST LOOSE (ROUND)

             This should be taken from the front side where the last hook will be hanging. This measurement should be taken very tightly with the customer. While taking this measurement, Customer will tell no need of this much tight but for perfect blouse the measurement should be taken like this tight only. EXAMPLE = 29” Waist Loose Can Be Less From 4 Inch Upto 10 Inch From The Body Loose Measurement.

Example – Body Loose-40= Hip Loose May Be = 36-30, Hip Loose Should Not Be 29 To 37.

 11.   FRONT DART POINT

       This measurement should be taken from the front side from the top of the shoulder to their front point center, this measurement should be very accurate.   EXAMPLE = 9”.

If The Customer’s Blouse Leaves The Point Center Sharp, Less The Front Point Center Height Or If The Customer Does Not Require Sharp, Less The Front Dot Height Measurement By 1”. 

While Taking Measurement if Customer in Kameez Top Dress,                                                    then Less This Front Dart Point by .5 inch to 1 Inch, as per the Customer Measurement.

 12. FULL SHOULDER

                   This measurement should be taken from the Back side from the left side Shoulder Bone to Right Side Shoulder Bone, this measurement should be very accurate. EXAMPLE = 14.5”.

13.    ARM ROUND

                            This Measurement should Be Taken from the Arm Circumference of The Customer, While Entering Middle Hand Loose automatically the Arm Round Will Appear.

            Method To Take Measurement From the Customer - 1
                           DIRECT BODY MEASUREMENT

1. LENGTH

         This measurement should be taken from the customer at the back side. First correct the customer blouse without any wrinkles now take the measurement from the shoulder top to their blouse. Height don't leave any folding cap for stitching gap height = 13”.

   

    While Taking Measurement, Extend The Height From Min 1inch To 1.5 Inch From Their Brasier Height. The Average Height For The Customers Will Be From 12inch To 14.5 Inches, Based Upon The Customer Height. If The Customer Height Exceeds From 14.5 Inch, The Front Patti Height Will Be Large, Then The Patti Will Bound To The Customers Stomach, So The Patti Will Be Fold, So Please Check With The Above Measurement.

 

2. UPPER CHEST

This should be taken from the customer's upper part of the chest, Under the arm. No loose should be leave on the tape, check the back side that tape is not in crosses. Take the measurement as round number like 32, 33, and 34. The measurement should not like ¼ ½ ¾. If we take Measurement Directly, Mostly will be Equal to Center Chest or Less From Center Chest, Will not Exceed the Center Chest. If Not taken can Be Equal to Center Chest or Less one Inch from Center Chest.

 

3.  CENTER CHEST

This should be taken from the customer's Center part of the chest. At the Dart Center Point. No loose should be leave on the tape, check the back side that tape is not in crosses. Take the measurement as round number like 32, 33, and 34.  The measurement should not like ¼ ½ ¾.

Don’t Let Loose In The Center Chest While Taking The Measurement, Less One Inch For Withour Lining Blouse. For Example - Actual Center Chest - For Ordinary Blouse (Without Lining) -30inch - 24 Hours Blouse, For Lining Blouse - 31 Inch.

 

4.  SHOULDER FINISHING

This should be taken from the customers blouse from the sleeve joint part to the next side finishing. This measurement will be like 2, 2 ¼, 2 ½. EXAMPLE = 2 ½”

Check The Below Measurements By Using The Customer Body Measurement. 

Customer  Shoulder Finishing Measurement Can Be Plus Or Minus 0.25 Inch From The Below Measurement. For Body Loose 26-30 = Shoulder Finishing 1.5 Inch

For Body Loose 31-36 = Shoulder Finishing 1.75 Inch; For Body Loose 37-38= Shoulder Finishing 2 Inch;

For Body Loose 39-43= Shoulder Finishing 2.25 Inch; For Body Loose 44-49= Shoulder Finishing 2.5 Inch.

Measurement Can Increase Or Decrease From .25 Inch From The Above Measurements. If This Measurement Exceeds From The Above Rule, The Neck Width Will Be Less, So The Blouse Will Not Set Perfect.

Tailoring CAD Software

Fashion dot is one of the leading providers of Tailor Made Software. We have been providing a solution to all tailoring industries. Our company provides the best Management software and other Tailor apps for all large and small industries.

Fashion dot is experienced in creating unique Tailor Made Software products for tailoring industries with uncommon requirements, such as handheld barcode scanners etc. Our technical team has a wide range of skills and programming capabilities, and the adaptability to tackle new projects and ideas. Our Tailor Made Software is unique, and you cannot find an ‘off-the-shelf’ system that fulfils your needs, our Tailor application will solve your problem.

We at fashion dot believe in developing Tailor Made Software which accommodates customers’ particular preferences. On the other hand, we fulfil our client's expectations to the fullest. We design Tailor Made Software’s in a systematic stage-by-stage process, providing us to take into account all the factors and hidden dangers which were never a part of the specifications at the initial stage of discussions.

Our Services

Fashion Dot has been offering various Tailor apps to customers. Our Tailor Made Software is the best in the market.   We have been in Tailor app development for more than a decade. This enables us to draw in excellence and proficiency in the field to our client’s businesses. Avail of the best tailoring software service here.  If you are looking Tailor Made Software or want to develop a Tailor app for your business. You are at the right place. We offer various tailoring software that fits your needs.

Pattern Making Software

Are you searching for suitable and trustworthy pattern-making software for your production house or garment industry? Don’t know where to find the best Tailor-made software? Fashion dot is offered innovative apparel pattern-making software that is perfect for manufacturers and designers of any size. Our pattern-making software allows the user to accurately build patterns, grade rules and markers for single styles or entire lines. The pattern-making process is important to run a tailoring business smoothly. Before it is achieved physically, however, at this point it’s very difficult to run it flawlessly thinking about time, circumstance and business volume.

Generally, pattern-making software abbreviated as CAD which elaborated as computer-aided design. It has known as design-making software which can help you to optimize your sketches. Once pattern-making tasks were tough and clumsy because all tasks were handled by an expert technician. But as technology develops now it becomes very easy. Fashion dot offers one of the best Pattern making software for tailoring industries. Tailor Made software is user-friendly along with cutting-edge features. It’s a comprehensive and full-featured CAD pattern-making software for the tailoring industry.

Our Tailor Made Software provides better accuracy with the fabric measurement and improves your productivity. Pattern-making software gets the estimation from the client and sends it to the tailor.

Laser Cutting Software

Advances in laser cutting technology keep on pushing ahead. Infiltrating new client portions dependent on components including increased thickness capacity and lower initial investment. Accomplishing the best outcomes from laser systems, new or old requires advanced CAM nesting software. Although, Tailor-made software developed by our experts provides superior solutions.

There will be more probability that measurement might miss or change when you are dealing with a large volume of clothes. As a result, this causes customer dissatisfaction. Our Laser cutting software can give you a better solution. It’s always challenging to provide precise cuts every time with the traditional method. Our Tailor Made software provides you with a precise cut that can’t be done accurately with a normal blade or scissors.

Why Choose Us?

Our Tailor Made software is simply best for smart tailors and the perfect software for Tailoring Shop. On the other hand, it is too simple to learn, easy to use to work and powerful in performance. The tailor app covers all activities and transactions of the tailoring business and gives you the desired information quickly.

We worked with several professional tailors, understood the tailoring business practically and developed the finest software for the tailoring industry.  As a result, Our Tailor Made software is broadly accepted and hundreds of smart tailors and boutiques running, managing and growing their tailoring business smartly, efficiently and easily.

   A list of measurements should be taken for a casual blouse.